وحدة LED الإضاءة الإلكترونية (المتقدمة) Dapper Lighting
305.00 ر.س
أضف 1,500.00 ر.س إلى السلة واحصل على شحن مجاني!
متاح للحجز (طلب مسبق)
The Advanced Flasher Module is a solid-state replacement and upgrade for traditional flasher relays. It is compatible with LED lighting, incandescent bulbs, or a combination of both. The flash rate remains digitally precise and is not affected by the current load.
The wide operating voltage range makes it suitable for various vehicle systems. Constructed with 100 percent solid-state components, the module operates silently and is designed for long-term reliability, free from mechanical wear. It features 1/4 inch blade terminals for a direct plug-in replacement and includes extended leads for flexible mounting and installation.
The module functions with the black wire connected to chassis ground and the white wire connected to the turn signal or hazard load. When 12V plus power is applied to the red wire, current is passed to the white wire to power the load. The module then cycles power on and off every 0.325 seconds, repeating this pattern until power is removed from the red wire.
ملاحظات ملاءمة:
- This Electronic Advanced LED Flasher Module is recommended for use with LED taillights. If your vehicle is equipped with turn signals only, typically from the mid-1960s and older, you will need just one module.
- If your vehicle is equipped with both turn signals and 4-way hazard flashers, typically from the mid-1960s and newer, you will need two modules for full functionality. Flasher modules are not required for use with our headlights.
التفاصيل
- Size: W 0.6 inch (15mm), L 1.9 inch (47mm), H 0.4 inch (10mm)
- Lead Length: 6.1 inch (155mm)
- Weight: 1 oz (15 g)
- Input Voltage: 5 to 18 volts
- Output Voltage: 5 to 18 volts, equal to input voltage
- Output Current: 10 amps maximum
- Standby Current Draw: 0.008 amps
- Connection Polarity: Negative ground wiring systems
- Flash Frequency: 1.6 Hz, cycles on for 0.3 sec and off for 0.3 sec
- Internal Switching: Solid state, no mechanical relay contacts
- External Connectors: 1/4 inch blade terminals, ring terminal for ground
- Maximum Ambient Operating Temperature: 120 degrees Fahrenheit / 50 degrees C
التفاصيل
- Connector: 1/4 inch blade terminals, ring terminal for ground
- ضمان: 5 سنوات ضمان
| الوزن | 0.23 كيلوجرام |
|---|---|
| الأبعاد | 7.6 × 12.7 × 2.5 سنتيميتر |
يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.
الشحن والتوصيل
شحن جوي سريع من أمريكا (10–14 يوم عمل)
يُشحن طلبك من مستودعات علاماتنا التجارية في أمريكا عبر الشحن الجوي السريع، ونتولى تخليصه من الجمارك السعودية، ثم يُوصَّل إلى باب منزلك. تستغرق مدة التوصيل عادةً من 10 إلى 14 يوم عمل من تاريخ تأكيد الطلب.
منتجات الأوتلت متوفرة مسبقاً في مستودعنا بالخبر، لذلك تُشحن بشكل أسرع. الطلبات التي تحتوي على منتجات الأوتلت فقط رسوم توصيلها 50 ريال فقط.
🇸🇦 المملكة العربية السعودية
-
سعر شامل: سعر المنتج يشمل الشحن الجوي الدولي والرسوم الجمركية وضريبة القيمة المضافة 15%. لا توجد أي مبالغ إضافية عند استلام طلبك.
-
توصيل مجاني: توصيل مجاني لجميع مناطق المملكة للطلبات التي تزيد عن 1,500 ريال. الطلبات الأخرى الأقل من 1,500 ريال تُضاف لها رسوم ثابتة قدرها 175 ريال للتوصيل والتخليص الجمركي، تظهر في صفحة الدفع قبل إتمام الطلب.
🌍 دول الخليج والشحن الدولي
-
نوصل حالياً داخل المملكة العربية السعودية فقط. للطلبات إلى دول الخليج الأخرى، يرجى التواصل معنا للحصول على عرض سعر قبل الطلب.

المراجعات
لا توجد مراجعات بعد.