MV-LOCK Monster Valve Single Power Tank

Red air-down collar has been re-engineered to be more ergonomic and easier to use.

Air up with your Monster Chuck (included) directly on your Ventoso RED modular tire inflator gauge!

Monster Valve LOCK Tire Inflator/Deflator Kit from Power Tank. Monster Valves are over-sized, light weight, yet strong valve stems that you install as a second stem in your wheel. Made from 7018 aluminum, they are STILL the fastest tire deflation and inflation product on the market.

Imagine airing down a 40″ x 13.5″ x 17″ tire from 35 psi down to 10 psi in under 30 sec. This kit also includes a Monster Chuck which, when used with a Power Tank, will inflate that same tire in 40 sec.

The MV-LOCK is designed to replace one of the InnerLock bolts found on Icon Pro Wheels. Simply unscrew an InnerLock bolt, swap the o-ring to the Monster Valve, and screw the Monster Valve down into the same place. You do NOT need to dismount the tire to install!

With an all-aluminum construction the total weight of each valve is a mere 1.1 oz. and does not require a tire rebalancing. Due to its construction, it is 5 times stiffer than a standard metal valve. We’ve seen a wheel deflect off a boulder on the trail without damaging the wheel or Monster Valve.

Because the Monster Valve is a secondary valve stem, you retain your TPMS sensors on your OEM valve stems.

Because of the incredible speed, we Highly recommend a large, easy to read Tire Pressure Gauge on your Schrader Valve.

The New Ventoso RED Tire Inflator Gauge and TPG RED Tire Pressure Gauge come standard with swappable chucks.

The Ventoso RED is available in five gauge options and will come with both a HiPPO2 Schrader tire chuck AND a modified Monster Chuck without the ball valve for inflating directly with your Tire Inflator Gauge.

The TPG RED is available in five gauge options and will come with a HiPPO2 Schrader tire chuck to attach to your Schrader valve stem to monitor second-to-second tire pressure as you air down with the Monster Valve and air up with the standard Monster Chuck attached directly to your air source.
التفاصيل

• 7018 Aluminum body
• Aluminum Collar and Cap
• Sold as Each
• Monster Chuck with 45 degree elbow included for inflating

يشمل:

• 5 MV-LOCK Monster Valves – 7/16-20
• Dual Schrader and Monster Core tool
• Silicone grease for maintenance
• Monster Chuck
• EVA PT Case

Warranty void if used with balancing beads.

Install Note: Blow out then inspect the threaded hole before installing the Monster Valve. We have come across leftover debris during some installs.